Expand+Entry 2022/2023
Applicants must be 16 years of age or over on 1st January of the year of entry to the course. For the majority of courses, applicants for first year admission to MTU must score the necessary CAO points and satisfy the relevant mini...

Hide-Entry 2022/2023
Applicants must be 16 years of age or over on 1st January of the year of entry to the course. For the majority of courses, applicants for first year admission to MTU must score the necessary CAO points and satisfy the relevant minimum entry requirements for their programme of study.

For most Higher Certificates (NFQ Level 6) and Degrees (NFQ Level 7) the minimum entry requirements are five Leaving Certificate subjects or equivalent examinations, obtaining a minimum grade O6/H7 in English or Irish, O6/H7 grade in Maths, and O6/H7 grade in three other subjects.

For most Honours Degrees (NFQ Level 8) the minimum entry requirements are six Leaving Certificate subjects or equivalent examinations, obtaining a minimum grade of two H5 and four O6/H7. Candidates are required to obtain a minimum of O6/H7 grade in Maths, and English or Irish.

Minimum entry requirements may be satisfied by the results of more than one Leaving Certificate.

CAO Points Systems
Standard applicants for first year courses will be awarded points by applying the normal CAO points scale to the results obtained in the Leaving Certificate Examination. Applicants are reminded that the points level varies each year according to supply and demand for places. The SIX best results in one sitting of the Leaving Certificate Examination will be used for points calculation.

NB: Calculation of points is independent of minimum entry requirements.

Common Bonus Points Scale for
Higher Level Mathematics
A bonus of 25 points is awarded to applicants who achieve a grade H6 or above in higher level (HL) Maths.

Formula:
• All students presenting H6 or above in HL Maths will have 25 points added to their score for Maths.

The six highest subject points scores will then be counted to achieve a cumulative points score, as is normal practice. The bonus points will only be relevant in cases where the subject HL mathematics (including bonus points) is scored as one of the candidate’s six best subjects for points purposes. Consequently, if HL mathematics (cumulative points score) is not among these six subjects, the bonus points will not be included in the total points score. Bonus points will be awarded irrespective of the year in which the examinations were taken.

MTU Maths Exam
Some students who apply for MTU courses may not achieve the required entry standard in Maths through the Leaving Certificate examination. For such applicants, the University offers a second chance to reach the required entry standard through a MTU Maths Exam. This second chance facility allows applicants (depending on their results in the MTU Maths Exam) to gain entry to courses with an Ordinary Leaving Certificate Maths entry standard and (with a higher level of performance) courses with a Higher Leaving Certificate Maths entry standard.

A minimum of a pass in the MTU Maths Exam i.e. 40% will allow an applicant to replace the Leaving Certificate Maths requirement of Grade O6/H7 minimum with a grade O6/H7 minimum in another Leaving Certificate subject i.e. applicants must have passed six subjects in the Leaving Certificate.

Applicants to courses which have a H4 Maths requirement must sit a second paper and achieve a 70% average across both papers.

The MTU Maths Exam reflects the actual mathematical requirements of MTU and is marked in accordance to procedure and criteria set out by MTU. It is only relevant for applicants who have applied to MTU.

This examination is not obligatory and does not result in the award of CAO points. Its sole purpose is to allow a student a second chance to achieve the qualifying standard in mathematics necessary for admission to certain MTU courses. It does not interfere in any way with an application made to other courses or colleges within the CAO system.

Attaining a qualifying standard in the MTU Maths Exam does not in itself guarantee a place on any course in MTU. The cut-off points for all courses will still apply.

In order to sit the MTU Maths Exam, students MUST APPLY ONLINE. The 2022 MTU Maths Exam will most likely be held on Tuesday following the week of the Leaving Certificate results release. Exact details will be published on www.mtu.ie/maths closer to the date.

If you require reasonable accommodation for this Maths Examination, due to a disability or learning difference, please contact the Disability Support Services:

MTU Cork Campus
E: dssCork@mtu.ie

MTU Kerry Campus
E: supportservicesKerry@mtu.ie

Expand+QQI-FET Awards
MTU welcomes applications, via the CAO, from applicants who hold a QQI-FET award at level 5 or level 6. Your QQIFET award can be used as an alternative to the Leaving Certificate for application purposes. Please note some MTU prog...

Hide-QQI-FET Awards
MTU welcomes applications, via the CAO, from applicants who hold a QQI-FET award at level 5 or level 6. Your QQIFET award can be used as an alternative to the Leaving Certificate for application purposes. Please note some MTU programmes of study are available to holders of any QQI-FET Level 5 or 6 award, while others will require specific awards.

The best score for each applicant is calculated and the results are forwarded to the CAO in July of each year. You can calculate your score using the free online points calculator at www.careersportal.ie/qqi/ which is based on the following scoring system:

Each level 5 and level 6 component is scored:
• 3.25 for a Distinction
• 2.16 for a Merit
• 1.08 for a Pass

This number is then multiplied by the individual component credit value to a maximum of 120 credits (a total of 390 points).

It may be easiest to multiply the individual component credit value by 3 for Distinction, 2 for Merit, and 1 for Pass, multiplying by 13 and dividing by 12.

Applicants who completed their QQI award in a year previous to the year of application should attach their statement of results to their CAO form.

For further information and details of specific QQIFET awards required please refer to the QQI-FET entry requirement listing on the CAO website http:// www.cao.ie/index.php?page=fetac_search

Linked Access Scheme for QQI-FET Applicants to Courses delivered on MTU Kerry Campus

MTU operates a Linked Access Scheme for holders of QQI-FET awards from Kerry Education and Training Board (ETB). Under this scheme a number of courses delivered in the MTU Kerry Campus are linked to specific courses in the Kerry ETB Colleges of Further Education. Applicants to these MTU courses, who hold a relevant QQI-FET award, will be considered on reduced CAO points. The University reserves a minimum of 5% of places in year one of our linked courses for applicants achieving specific awards/distinctions in the QQI-FET course.

Applicants must meet the following criteria in order to be considered:

1. Achieve a minimum of a full linked QQI award to be considered for a level 7 programme
OR
2. Achieve a full linked QQI award, with a minimum of 3 distinctions, to be considered for a level 8 programme.

Complete an application to CAO in for the relevant programme(s) AND complete the MTU Kerry Campus application form. CAO offers will be made in Round 0 (early August) and applicants will not have to compete with Leaving Certificate students in Round 1.

Please note that the KERRY ETB course names may vary slightly, so the application will be considered on the QQI Code i.e. 5M2102 etc.

For further information contact:
MTU Kerry Campus
E: admissionsKerry@mtu.ie

Further Education Colleges Scheme (CCPS) – for QQI-FET applicants to courses delivered on MTU Cork Campus

MTU has a special scheme for the admission of students who successfully complete courses in Further Education (FE) Colleges in Cork. Under this scheme a number of courses delivered in MTU Cork Campus are linked to certain courses in the FE colleges and the University reserves a number of places on its linked courses for applicants achieving specified levels and other requirements in their awards.

Cork Further Education Colleges
Cork College of Commerce
Coláiste Stiofáin Naofa
CityNorth College of Further Education
St John’s Central College
Kinsale College of Further Education
Mallow College of Further Education

For further information contact:
MTU Cork Campus
E: admissionsCork@mtu.ie

Expand+The University welcomes applications from persons who will be 23 years of age and over on the 1st January of the proposed year of entry and who wish to be admitted as a mature student. Mature applicants should apply to the CAO before 5.15pm, 1st ...

Hide-The University welcomes applications from persons who will be 23 years of age and over on the 1st January of the proposed year of entry and who wish to be admitted as a mature student. Mature applicants should apply to the CAO before 5.15pm, 1st February. Each mature applicant is considered on an individual basis by the University, usually by the information supplied on their CAO application form. In addition, they may be required to present a portfolio or attend an aptitude test or written assessment and/or interview. These are normally held in May each year for programmes where these are required

Mature applicants are not required to have a Leaving Certificate or the minimum entry points. However, some programmes may have specific requirements and mature applicants should familiarise themselves with these. Applicants should include documentation in relation to any courses that they have undertaken at second level (Junior and Leaving Certificate) as well as any professional and hobby courses that they may have taken. Applicants are strongly encouraged to include details of all courses that they have completed in the past, as well as providing any information that may reflect their preference choices (i.e. work experience/ motivation/goals, etc.). These qualifications will be considered, along with their statement of interests, as part of the assessment.

Note: Mature applicants may also be considered on their Leaving Certificate and QQI points. Mature applicants to MTU Kerry Campus who hold Leaving Certificate results are advised to contact admissionskerry@mtu.ie

When completing the CAO application form, those applying as mature students should tick the mature box on the application form and complete the relevant details. It is very important that mature applicants complete all sections of the CAO application form as this information is taken into consideration when assessing the student’s application. Mature applicants from outside the EU are required to submit relevant documentation in relation to their status in Ireland, prior to accepting an invitation to attend aptitude tests or written assessment and/or interview.

Late applicants (i.e. by 5.15pm, 1st May) to CAO will be considered by the University. Late applicants are advised to notify the MTU Admissions Office directly after they have submitted their CAO application. Only where required for particular programmes these applicants may be invited to present a portfolio or attend the aptitude test or written assessment and/or interview in May. Otherwise these applicants may undertake tests and/ or interviews in early August. However, the University cannot guarantee that late applicants will be called for assessment.

Please note the quota of reserved places on high demand programmes may have been filled in May by the on-time candidates. Late candidates may be put on a waiting list if they are successful. However, we cannot guarantee places to these applicants. Mature applicants should also contact the respective MTU Admissions Office if they avail of the change of mind facility with CAO (i.e. by 1st July).

If you are considering applying to MTU as a mature applicant and have any further queries, please contact:

MTU Cork Campus
Christine Nolan
Mature Student Officer
T: +353 (0)21 432 6777
E: mature.studentcork@mtu.ie

MTU Kerry Campus
T: +353 (0)66 714 5638
E: admissionsKerry@mtu.ie

Expand+Entry 2022

Early online application (discounted): Fee €30 Closing Date: 20 January 2022 at 5pm

Normal online application: Fee €45 Closing Date: 1 February 2022 at 5pm

Late online application - restrictions apply (see page 3 2022 CAO Hand...

Hide-Entry 2022

Early online application (discounted): Fee €30 Closing Date: 20 January 2022 at 5pm

Normal online application: Fee €45 Closing Date: 1 February 2022 at 5pm

Late online application - restrictions apply (see page 3 2022 CAO Handbook): Fee: €60 Closing Date: 1 May 2022 at 5pm

Change of Mind - restrictions apply (see page 3 2022 CAO Handbook): Fee: Nil Closing Date: 1 July 2022 at 5pm

Exceptional online late application (see page 31 of the 2022 CAO Handbook): Fee €60 Closing Date: 22 July 2022 at 5pm

Be sure to complete any action well in advance of closing dates. You should avoid making an application close to a closing date. No extensions to closing dates will be allowed and all application fees are non-refundable.

LATE APPLICATIONS
Late Applications are those which are received after 5pm on 1 February 2022. The closing date for late applications is 5pm on 1 May 2022, subject to the restrictions listed on page 3 of the 2022 CAO Handbook. The online facility for late applications opens on the 4 March 2022 at 12:00 noon - a fee of €60 applies.

Exceptional Late Applications (Exception to the timetable)
The exceptional closing date of 22 July at 5pm applies only to applicants who are registered as an undergraduate student on 1 May 2022 in any year in any one of the participating HEIs (subject to the exclusions listed below). In order to avail of the Exceptional Late Application facility you must have entered the HEI through the CAO system.

If you did not enter your current course through the CAO system, you must first contact the Admissions Office of the HEI to which you wish to apply and they will inform you if you may submit an application direct to the institution.

Exclusions:
You may submit a late application only for entry to courses other than your existing course. If you wish to repeat the year in the same course you must arrange this within your HEI.

Mary Immaculate College Limerick, Marino Institute of Education, Trinity College Dublin, University of Limerick, Maynooth University and Galway Mayo Institute of Technology have special procedures in place in the case of current or previous students who wish to apply for entry to another course in the same HEI. Such applicants must contact their Admissions Office to determine the application procedure. However, if you are a student in another HEI and you wish to apply to any of these six HEIs, you should apply through CAO.

Refer to page 31 of the 2022 CAO Handbook on how to make an Exceptional Late Application.

Restrictions
As a CAO applicant you may experience one or more of the following restrictions based on your course choices, your category of application, or restrictions imposed by the HEIs that you wish to apply to. Please read the section on 'Restrictions' on page 3 of the 2022 CAO Handbook carefully. This section includes information on:

General Restricitons
1. Making a late application
2. Making changes to your course choices

Restricted Courses
3. Applying for a restricted course

Mature Applicants
4. Mature applicants

Supplementary Admissions Routes
5. Applying for DARE and/or HEAR

Expand+Overview
Mechanical engineering involves the design, manufacture and operation of products, components or systems incorporating motion. Studying mechanical engineering enables students to learn how to systematically design essential machine e...

Hide-Overview
Mechanical engineering involves the design, manufacture and operation of products, components or systems incorporating motion. Studying mechanical engineering enables students to learn how to systematically design essential machine elements and to devise solutions ranging from R&D or manufacture in automotive, aerospace, power generation and biomedical engineering applications, to the commissioning and maintenance of industrial or pharmaceutical facilities.

Design and project work is a major feature of the course. The Innovative Project Development modules in year 3 enable students, working in teams, to bring a concept from the idea stage through to a finished prototype, considering the technical performance and commercial potential of their designs. In the final year, each student undertakes an individual project involving research, design, prototype development and experimental verification to meet a real need.

Honours degree graduates generally gain employment as mechanical, design, manufacturing, production, process, plant, project or maintenance technologists/ engineers. They work in fields such as aerospace, automotive, computer and electronic manufacture, machine and plant design, power generation, engine design, contracting and consulting, biomedical and pharmaceutical sectors.

Students have the option of undertaking a work placement in industry or in a research laboratory in Ireland or abroad with one of our partner institutions. Examples include ICAM, (France), Einm (France), Uniten (Kuala Lumpur), University of Vigo (Spain), Czech Technical University in Prague, University of Applied Science, Frankfurt.

Expand+First Year at a Glance:
• Engineering Physics: application of physics to engineering problems

• Properties of Materials: appropriate choice of materials to use for a particular engineering/device application

• Engineering Computing:...

Hide-First Year at a Glance:
• Engineering Physics: application of physics to engineering problems

• Properties of Materials: appropriate choice of materials to use for a particular engineering/device application

• Engineering Computing: programming for engineering applications using numerical methods

• Thermo/Fluid Mechanics: application of hot and cold fluid systems in engineering

• Mechanics: understanding the performance of engineering materials when subject to external loads and forces

• Engineering Chemistry: application of chemistry to engineering problems

• 3D CAD: computer-aided design (CAD) is similar to the Leaving Certificate subject Design and Communication Graphics

• Workshop: shaping and application of metal components

• Mathematics

Expand+Accreditation
The BEng (Honours) in Mechanical Engineering is fully accredited by Engineers Ireland at the Bachelor (Honours) Level 8 educational standard. Further learning is required to meet the educational standard for Chartered Engineer.
...

Hide-Accreditation
The BEng (Honours) in Mechanical Engineering is fully accredited by Engineers Ireland at the Bachelor (Honours) Level 8 educational standard. Further learning is required to meet the educational standard for Chartered Engineer.

Question Time
What level of design is involved with mechanical engineering?
Design is the main focus of the programme and utilises all the modern computer-aided design tools for 3D solid modelling, stress analysis, system simulation etc.

Are there any events I should attend to learn more about mechanical engineering?
MTU Bishopstown Campus usually hosts the Cork Mechanical, Manufacturing & Biomedical Engineering Annual Exhibition in April. Please see www.mtu.ie for details.

Is there a scholarship available for the course?
Yes. The MTU-DePuy Synthes Mechanical Engineering scholarship is open to CAO applicants and worth €3,000 per year for the successful candidate. DePuy Synthes (a Johnson & Johnson company) is a major multinational employer in the Cork region, manufacturing artificial joints in Ringaskiddy in Cork. The support of DePuy Synthes for the scholarship is a major endorsement of the relevance of the course to the Mechanical Engineering industry.

Expand+Further Studies
At the end of year 3, subject to a minimum of a H2.2 standard achieved in year 3, students may elect to transfer to the integrated MEng in Mechanical Engineering (Level 9) comprising two further years (4 semesters) of study. Suit...

Hide-Further Studies
At the end of year 3, subject to a minimum of a H2.2 standard achieved in year 3, students may elect to transfer to the integrated MEng in Mechanical Engineering (Level 9) comprising two further years (4 semesters) of study. Suitably qualified Level 8 graduates are eligible to progress to taught master programmes or to research at either master or PhD level.

Career Opportunities
Mechanical Engineering is a broad-based discipline offering career opportunities in design, manufacturing, technical support in a wide range of industries including oil/ gas, power generation, plant construction, medical devices, aerospace and automotive. Many mechanical engineers also progress into general management roles where their analytical skills are greatly valued.

• Mechanical engineering design
• Consulting project engineer
• Manufacturing and precision engineering
• Process industries including chemical and biopharmaceutical
• Aerospace
• Project engineering
• Offshore oil and gas
• Biomedical device design and manufacture