Skip to main content

Engineering with Management

Higher Education CAO
TR038

Engineering with Management is an exciting and wide-ranging engineering programme that is broad in scope and aims to develop both the technical and business aspects of engineering. Engineers are problem solvers.

Award Name Degree - Honours Bachelor (Level 8 NFQ)
NFQ Classification Major
Awarding Body University of Dublin
NFQ Level Level 8 NFQ
Award Name NFQ Classification Awarding Body NFQ Level
Degree - Honours Bachelor (Level 8 NFQ) Major University of Dublin Level 8 NFQ
Course Provider:
Location:
Dublin City Centre
Attendance Options:
Daytime, Full time
Qualification Letters:
BSc (Eng) (Hons)
Apply to:
CAO
CAO Points Round 1
Year Points
2023 602
2022 593
2021 589
2020 532

Duration

4 years (5 years with a master's)

Specific Subjects or course requirements

Minimum Entry Requirements: Irish Leaving Certificate

To be considered for admission to a degree course at the University you must:

Present six subjects, three of which must be at grade 5 or above on higher Leaving Certificate papers or at least grade 5 in the University matriculation examination.

The six subjects above must include:

A pass in English.

A pass in mathematics (or foundation-level mathematics (see note 2)) and a pass in a language other than English
OR
A pass in Latin and a pass in a subject other than a language.

Special Entry Requirements

H4 Mathematics

Leaving Certificate General Entry Requirements

Admission Requirements 2024

To qualify for admission to an honours degree course at the University you must:

1 meet the minimum entry requirements (see above).

2 satisfy course specific requirements (where applicable), see above.

3 where there is competition for places, have good enough examination results to be included among those to whom offers are made (see the Leaving Certificate scoring system or Advanced GCE (A Level) scoring system).

Minimum entry points for recent years are available at: www.tcd.ie/study/apply/admission-requirements

Also see ‘Other Requirements’ below.

Notes:
1 A pass means grade O6/H7 or above in the Leaving Certificate and grade 7 or above in the University matriculation examination.

2 Mathematics at foundation-level is acceptable for minimum entry requirements only, for all courses except nursing or midwifery courses.

Irish at foundation-level is not acceptable for minimum entry requirements, course requirements or for scoring purposes.

3 Students may combine grades achieved in different sittings of their Leaving Certificate/Matriculation examinations for the purpose of satisfying minimum entry and/or course requirements, but not for the purposes of scoring. This is not permitted for Medicine.

4 Combinations of Leaving Certificate subjects not permitted:

Physics/chemistry may not be presented with physics or chemistry.

Biology and agricultural science may not be presented as two of the six subjects required for minimum entry requirements, and they may not be presented together to satisfy course specific requirements. However, both may be used for scoring purposes.

Art and music may not be offered as two of the three higher Leaving Certificate grades for minimum entry requirements, but both may be used for scoring purposes.

Bonus Points for Higher Level Mathematics
All students resenting H6 or above in higher level mathematics will have 25 points added to their score for mathematics. The bonus points will only be relevant where mathematics is scored as one of a student’s six best subjects for points purposes.

An applicant’s six best results from one sitting of the Leaving Certificate will be counted for scoring purposes. Applicants may combine results from the Leaving Certificate and the Trinity matriculation examination of the same year for scoring purposes.

The minimum entry levels (points) for Trinity in recent years are available at: www.tcd.ie/study/apply/admission-requirements/undergraduate

University Matriculation Examination
A matriculation examination, graded in equivalent terms to grades used in higher Leaving Certificate examination papers, is held in Trinity every year, usually in April. The subjects of the matriculation examination are Biblical Studies and Geology. You may take one or both of the subjects available, but you should note that the range of university matriculation examination subjects available is not sufficient for the fulfilment of all minimum entry requirements.

The closing date for application for the examination is 1 March of the year of proposed entry to study. Application forms and a syllabus can be obtained from:
Academic Registry, Watts Building, Trinity College Dublin,
the University of Dublin, Dublin 2,
T: +353 1 896 4500,
E: academic.registry@tcd.ie

Other Requirements

English Language Requirement
All applicants must present an English language qualification. Accepted/permitted qualifications are:
1 Irish Leaving Certificate: a grade 6 or better in ordinary level English.

2 GCSE: a grade C/grade 5 or better in English language.

3 US High School: a grade C in English taken in final year.

4 TOEFL
› Paper-based 570 (with a TWE score of 4.5)
› Computer-based 233 (with a score of 4.5 in essay)
› Internet-based 90 (with a written score of 21)

5 Cambridge Advanced/Proficiency: grade C

6 IELTS (academic version) 6.5 (no individual band below 6)
› For Dental courses: IELTS (academic version) 7 (no individual band below 7)
› For Clinical Speech and Language Studies: IELTS (academic version) 7 (no individual band below 7)

7 Pearson Test of English (Academic) – PTE Academic: a minimum score of 63 (with no Communication Skills section score below 59)

8 International Baccalaureate: English A1, A2 or B: 5 at Higher Level (4 at Standard Level if presenting IB through English).

9 QQI/FET: a pass in Communications module (5N0690).

10 Duolingo English Test: Minimum overall score of 120/160, with no section below 105.

Note: Examination results are only valid for two years.

Age Requirement
Applicants seeking admission in 2024 must have a date of birth before 15 January 2008.

Garda Vetting
Students on courses with clinical or other professional placements may be required to undergo Garda vetting procedures prior to commencing placements. If, as a result of the outcome of the Garda vetting procedures, a student is deemed unsuitable to attend clinical or other professional placement, he/she may be required to withdraw from his/her course. Students who have resided outside Ireland for a period of 6 months or more will be required to provide police clearance documentation from the country (including different states) or countries in which they resided.

Students who accept an offer will be informed of the procedures to be followed to complete the vetting process (as part of the student orientation information).

Fitness To Practice
Professional courses demand that certain core competencies are met by students in order to graduate and practice professionally after qualification. Trinity has special responsibility to ensure that all students admitted to all professional programmes will be eligible for registration by the relevant professional body upon graduation. It is important to us that our students are able to fulfil the rigorous demands of professional courses and are fit to practice.

Health Screening
Offers of admission to the following courses are made subject to certain vaccination requirements and/or certain negative test results:
› Clinical Speech and Language Studies
› Orthodontic Therapy, Dental Science, Dental Hygiene, Dental Nursing, and Dental Technology
› Medicine
› Nursing and Midwifery
› Occupational Therapy
› Pharmacy
› Physiotherapy
› Radiation Therapy
› Social Studies (Social work)

Full details are available at: www.tcd.ie/study/apply/admissionrequirements/undergraduate

Leaving Certificate Vocational Progamme LCVP

Leaving Certificate Vocational Programme Link Modules
These modules are accepted for scoring purposes only and are awarded the following points: Distinction 66, Merit 46, Pass 28.

QQI FET Applicants General Information

QQI/FETAC Qualifications
There is an entry route to a number of degree programmes in Trinity for applicants presenting appropriate QQI/FET Level 5 or 6 Major Awards. Applicants presenting distinctions in five modules can be considered for admission.

Full information on courses with QQI entry routes, requirements etc., can be found at the link below.

QQI FET General Information Link

QQI FET Entry Requirements

Careers / Further progression

Graduate skills and career opportunities
Graduates of the programme will be suited to jobs in the high-tech sector (e.g. computer, aerospace, pharmaceutical, medical devices, electronic) as well as traditional manufacturing (e.g. design, fabrication, assembly). They often work as project managers on teams with design and test engineers, managers, financial controllers, marketing and sales people. The qualification is also well suited to those who wish to pursue careers in project management and management consultancy as well as in the broader business and financial sectors.

Past graduates are currently working in DePuySynthes, IBM, Intel, Project Management Group, JP Morgan, Davies Stockbrokers, Pfizer, Jaguar Land Rover, Denis Woods Forensic Engineers, PwC Accountancy, Accenture, and Reckitt Benckiser, and many have gone on to create tech start-up businesses.

Course Web Page

Further information

Mature Students
All undergraduate courses in Trinity are open to mature applicants. Mature student applicants are not required to satisfy the normal minimum entry requirements and are not required to meet competitive academic entry levels (such as Leaving Certificate points), but are considered in the first instance on the basis of how relevant their life, work and educational experiences are to the course(s) that they wish to pursue. In addition, all applicants should demonstrate an interest in and knowledge of their course choice(s).

In order to apply to Trinity as a mature applicant you must:
› be an EU applicant (see page 218)
› be at least 23 years of age on 1 January 2024
› submit a CAO application form to the Central Applications Office (CAO) by 1 February 2024

Late applications will not be considered from mature students.

CAO applications may be made online at: www.cao.ie

Further information about applying through the CAO as a mature student can be found www.cao.ie/index.php?page=mature

Applicants to all courses may be required to attend an interview. Interviews are usually held between April and May.

Certain courses may also require applicants to meet other assessment criteria. For information on additional assessments for specific courses please refer to the Mature Student Guidelines booklet available from:

Academic Registry, Watts Building, Trinity College Dublin, the University of Dublin, Dublin 2, T: +353 1 896 4500, E: academic.registry@tcd.ie

The Mature Student Guidelines booklet is also available to download at: www.tcd.ie/maturestudents/apply

Trinity will inform mature applicants of the outcome of their application before the end of May to allow successful applicants the maximum time possible to prepare for the start of the academic year 2024. Official offers to successful applicants are made through the CAO in early July. To secure your place you must return a formal acceptance notice to the CAO by the specified reply date.

An information seminar to prepare all successful mature applicants for starting in Trinity will take place in July 2024. An orientation programme for all successful mature applicants will take place in August 2024.

For further information on studying in Trinity as a mature student please contact the mature student officer, T: +353 1 896 1386, E: mature.student.officer@tcd.ie For more information, visit: www.tcd.ie/maturestudents

Please Refer to: http://www.tcd.ie/study/eu/undergraduate/

Places 2023: 27

Entry 2024

Early online application (discounted): Fee €30 Closing Date: 20 January 2024 at 5pm

Normal online application: Fee €45 Closing Date: 1 February 2024 at 5pm

Late online application - restrictions apply (see page 3 2024 CAO Handbook): Fee: €60 Closing Date: 1 May 2024 at 5pm

Change of Mind - restrictions apply (see page 3 2024 CAO Handbook): Fee: Nil Closing Date: 1 July 2024 at 5pm

Exceptional online late application (see page 34 of the 2024 CAO Handbook): Fee €60 Closing Date: 22 July 2024 at 5pm

Be sure to complete any action well in advance of closing dates. You should avoid making an application close to a closing date. No extensions to closing dates will be allowed and all application fees are non-refundable.

LATE APPLICATIONS
Late Applications are those which are received after 5pm on 1 February 2024. The closing date for late applications is 5pm on 1 May 2024, subject to the restrictions listed on page 3 of the 2024 CAO Handbook. The online facility for late applications opens on the 5 March 2024 at 12:00 noon - a fee of €60 applies.

Exceptional Late Applications (Exception to the timetable)
The exceptional closing date of 22 July at 5pm applies only to applicants who are registered as an undergraduate student on 1 May 2024 in any year in any one of the participating HEIs (subject to the exclusions listed below). In order to avail of the Exceptional Late Application facility you must have entered the HEI through the CAO system. This is an exceptional late closing date and all steps must be completed by 5pm on 22 July. No changes may be made after this date.

If you did not enter your current course through the CAO system, you must first contact the Admissions Office of the HEI to which you wish to apply and they will inform you if you may submit an application direct to the institution.

Exclusions:
You may submit a late application only for entry to courses other than your existing course. If you wish to repeat the year in the same course you must arrange this within your HEI.

Mary Immaculate College Limerick, Marino Institute of Education, Trinity College Dublin, University of Limerick and Maynooth University have special procedures in place in the case of current or previous students who wish to apply for entry to another course in the same HEI. Such applicants must contact their Admissions Office to determine the application procedure. However, if you are a student in another HEI and you wish to apply to any of these five HEIs, you should apply through CAO.

Refer to page 34 of the 2024 CAO Handbook on how to make an Exceptional Late Application.

Restrictions
As a CAO applicant you may experience one or more of the following restrictions based on your course choices, your category of application, or restrictions imposed by the HEIs that you wish to apply to. Please read the section on 'Restrictions' on page 3 of the 2024 CAO Handbook carefully. This section includes information on:

General Restrictions
1. Making a late application
2. Making changes to your course choices

Restricted Courses
3. Applying for a restricted course

Mature Applicants
4. Mature applicants

Supplementary Admissions Routes
5. Applying for DARE and/or HEAR

What is Engineering with Management?
Engineering with Management is an exciting and wide-ranging engineering programme that is broad in scope and aims to develop both the technical and business aspects of engineering. Engineers are problem solvers. In almost every human endeavour, an engineer has been involved somewhere. They have created the designs and systems to make everything from: gliders to space craft, ball-point pens to laser printers, matchbox cars to F1 racing cars, wheelchairs to artificial joints for the human body.

Engineering with management is concerned with the analysis, design, improvement, installation and management of integrated systems of people, finance, materials and equipment. Our graduates have the technical skills common to all excellent engineers, with this knowledge augmented by an understanding of the commercial and industrial environment and the ability to generate innovative solutions to the problems of the world.

Engineering with Management: The course for you?
Do you like the creative, analytical, problemsolving focus of engineering? Do you like the diversity of engineering? Perhaps, though, you see your professional life more involved with running a company, managing projects, or being a consultant? If any of these describes you, then you should consider this course. The diversity and flexibility of this course will give you endless possibilities in your professional life, both in what you do and how you do it. As well as providing the core competencies for employment in research, manufacturing, production, design and engineering consultancy, the breadth of the course equips graduates to compete favourably with general graduates for careers in the business and financial sectors.

Engineering with Management at Trinity
A key feature of the engineering with management programme is that the class size is capped at 20 students. This reflects a core belief in the value of small-group teaching and hands-on exercises, which is delivered through active learning strategies implemented by our world-class staff. The course is a professional engineering degree, fully accredited by Engineers Ireland, that produces graduate engineers capable of working in the competitive environment of world-class manufacturing.

Students have the opportunity of studying abroad and have the chance to be chosen for a team which travels to Stanford University and the Silicon Valley area to showcase their product design projects.

Your degree and what you’ll study
The course is structured around themes that are developed over the four years. These themes are: Engineering Fundamentals, Business and Management, Design and Manufacturing Engineering. Approximately 80% of the syllabus comprises engineering subjects such as design, automation, computer simulation/modelling, bio-engineering and materials. The remaining 20% comprises management subjects such as marketing, finance, quality systems, supply chain management and human resources management. Engineering is a busy but exciting course with typically full days in labs, workshops and lectures, as well as working on team and group projects.

A variety of assessment techniques ranging from traditional examinations to continuous assessment, project work, design portfolios is used over the four or five years.

Throughout the course, a strong emphasis is placed on group projects, case studies and teamwork. Many of our 4th years are undertaking the 4E5 (Innovation in Product Development) module. This pairs Trinity students in teams with students from the world’s leading universities (e.g. Stanford in the US); each team consisting of 4 students from each university. The course also involves trips to Stanford and the Silicon Valley area. The teams are working with industrial sponsors, recent examples being SAP and Panasonic, with a mission to create innovative solutions to real customer needs.

At the end of year three you make a decision to pursue a bachelor’s degree (B. Sc.(Ing)) or a master’s degree (M.A.I.) depending on achieving the necessary academic standards.

Most of our fourth year students are in the first year of a two year master’s-cycle leading to the award of an M.A.I. degree (see below). Students electing to conclude their studies with a bachelor’s degree (B.Sc. (Ing)) undertake a Capstone project. Those continuing to a fifth year have a number of other options such as the innovation projects (see above), industry-based internships, or study-abroad programmes (see below). Students in fifth year (studying for an M.A.I. qualification) undertake a major individual research project and range of advanced specialist technical modules.

Five year Masters degree
Students who achieve a satisfactory academic standard in their third year may proceed to a two-year Masters degree cycle, which will lead to the award of an M.A.I. (Masters in Engineering) degree. Those students who choose to graduate after four years with the B.Sc. (Ing) degree will require additional qualifications to be eligible for professional accreditation with Engineers Ireland.

Four principal routes are available:
› The entire fourth year is taken abroad at an approved partner university, after which students return to Trinity and complete their studies with an appropriate range of advanced level modules and a substantial researchbased project.

› Semester 2 of year 4 is spent in industry on the Engineering project Internship where students carry out project work in one of Trinity’s internship partner industrial companies based in Ireland or abroad. The engineering project internship is full time from mid-January to June. Example companies include; Nokia, DepuySynthes, Ferrari, Glanbia, Deloitte, PwC and many others.

› An extended period (approximately 6-8 months) in the fourth year is spent at either an approved partner university (such as KTH Stockholm, IST Lisbon, UPC Barcelona, EPFL Lausanne, KUL Belgium), or in a formal industrial placement, after which students return to Trinity and complete their studies with an appropriate range of advanced level modules and a substantial Capstone research project.

› An integrated two-year cycle based in Trinity, comprising an approved combination of project work and lectures.

www.tcd.ie/mecheng/engman
Email: kevin.kelly@tcd.ie

Course Provider:
Location:
Dublin City Centre
Attendance Options:
Daytime, Full time
Qualification Letters:
BSc (Eng) (Hons)
Apply to:
CAO
CAO Points Round 1
Year Points
2023 602
2022 593
2021 589
2020 532