Expand+Taught Programmes - Application Process
All applicants apply through the online application system by choosing a programme from one of the five faculties. If Non-EU applicants wish to contact the International Education Division first before complet...

Hide-Taught Programmes - Application Process
All applicants apply through the online application system by choosing a programme from one of the five faculties. If Non-EU applicants wish to contact the International Education Division first before completing an online application, they can do by filling out the International Education Division Enquiry Form. For more information visit the International Office website.

International Office:
Tel: +353 61 202414
Fax: +353 61 213062
email: international@ul.ie.

Visit the International Office website

What to include (upload) with your application
• Certified results for all examinations mentioned on your application form and/or confirmation of the award of your qualification(s).
• Evidence of English language proficiency.
•Certified translations of your award and transcripts if they are not in English
• A copy of your birth certificate or passport

Please note that certain programmes request additional documentation such as personal statements and/or references. Please check the programme entry requirements to ensure you have included the required information.

What happens after I apply?
Once you submit your application online, you will receive an email acknowledgement. It is important that you upload all your documents at the time of application as you will not be able to upload these at a later stage. If you do not have your documents at the time of application, you will need to mail them to the Postgraduate Admissions Office once they become available.
Your application will then be passed to the Course Director who will decide whether or not to offer you a place. Some programmes require interviews and you will be notified of the date, time and venue.

Decision Letter
You will receive one of the following letters from the Postgraduate Admissions Office:
• An unconditional offer. You satisfy all of the academic conditions required and we are offering you a place.
• A conditional offer. You do not yet satisfy the academic conditions required before entry but you propose to do so. The conditions are listed in the offer letter and may include English language tests as well as degree results.
• Letter of regret. We are unable to offer you a place.

Please note that a decision is authoritative and official only if it has been sent in writing from the Postgraduate Admissions Office.

Accepting a place at the University of Limerick
To accept your offer you must pay your acceptance deposit and send in the course acceptance form, stamped by the bank, to the Postgraduate Admissions Office. On receipt of this acceptance form/deposit, the Postgraduate Admissions Office will change the status of your application to Firmly Accepted. You will receive an orientation pack in August. The orientation pack will provide you with full details of orientation and enrolment.

Deferring your offer
You cannot defer a place on a taught postgraduate programme without the permission of the Course Director. If you are offered a deferral, you will receive a letter from the Postgraduate Admissions Office confirming that a deferral has been granted. You should then contact the Postgraduate Admissions Office before March of the following year to confirm that you will be accepting your place. If you are not offered a deferral, then you must re-apply for the programme the following academic year.

Contacts
Postgraduate Admissions Office
Graduate School
Foundation Building
University of Limerick
Tel: +353 61 234377
Fax: +353 61 233287
Email: postgradadmissions@ul.ie

Expand+Applicants for a Master’s programme must normally have a first or second class Level 8 honours degree (NFQ or other internationally recognised equivalent) in a related physical science or engineering subject(s) or equivalent prior learning that is re...

Hide-Applicants for a Master’s programme must normally have a first or second class Level 8 honours degree (NFQ or other internationally recognised equivalent) in a related physical science or engineering subject(s) or equivalent prior learning that is recognised by the University as meeting this requirement. Applicants must also satisfy the English Language Requirements of the University. The University reserves the right to shortlist and interview applicants as deemed necessary.

What To Include With Your Application:
• Qualification transcripts and/or certificates (including certified English translations if applicable)
• English language qualification(s) (if English is not your first language)
• A copy of your birth certificate (long document)

English Language Requirements
Applicants whose first language is not English must provide evidence of either prior successful completion of a degree qualification taught through the medium of English or meet one of the criteria below (no longer than two years prior to application):

Acceptable English Language qualifications include the following:
•Matriculation examinations from European countries where English is presented as a subject and an acceptable level is achieved
•Irish Leaving Certificate English –Ordinary Level Grade D or above
•TOEFL – 580 (paper based) or 90 (internet based)
•IELTS – Minimum score of 6.5 with no less than 6 in any one component.
•English Test for English and Academic Purposes (ETAPP) – Grade C1
•GCE ‘O’ level English Language/GCSE English Language – Grade C or above
•University of Cambridge ESOL –Certificate of Proficiency in English - Grade C / Certificate in Advanced English - Grade A
•GCE Examination Boards – Oxford Delegacy of Local Examinations – Grade C / Cambridge Local Examinations Syndicate – School Certificate Pass 1-6 / University of London Entrance and School Examinations Council – School Certificate Pass 1-6

Results in examinations other than those listed above may also be accepted as meeting our English language requirements. Contact the International Education Division for advice.

Expand+This programme is designed to produce Masters graduates who have an in-depth knowledge of instrumentation involved in Materials analysis and characterisation together with a detailed knowledge of Materials Science, Materials Processing, and Surface T...

Hide-This programme is designed to produce Masters graduates who have an in-depth knowledge of instrumentation involved in Materials analysis and characterisation together with a detailed knowledge of Materials Science, Materials Processing, and Surface Technology. The specialist modules will allow students to become fully briefed in the material science and engineering associated with high strength materials used in the aero-industry or with techniques for materials and coatings selection design, together with the materials selection methods typically employed by engineering consultants.

Expand+Overview
This programme is designed to produce Masters graduates who have an in-depth knowledge of instrumentation involved in Materials analysis and characterisation together with a detailed knowledge of Materials Science, Materials Processing, and...

Hide-Overview
This programme is designed to produce Masters graduates who have an in-depth knowledge of instrumentation involved in Materials analysis and characterisation together with a detailed knowledge of Materials Science, Materials Processing, and Surface Technology. The specialist modules will allow students to become fully briefed in the material science and engineering associated with high strength materials used in the aero-industry or with techniques for materials and coatings selection design, together with the materials selection methods typically employed by engineering consultants. From this knowledge base, graduates could expect to work in many manufacturing sectors or consultancy or, to continue their education to PhD level.

Objectives:
The objectives of the programme are:
• To provide science, engineering and technology graduates with a competitive edge for a career in high technology manufacturing industries

• To provide graduates with analytical skills and knowledge which prepare them for careers in manufacturing, R & D or product / process design

• To develop graduates with excellence in Materials Science and Engineering capability to underpin National and International Industrial development

Programme of Study:
This Master of Science course is a two Semester plus Summer full time programme based on a modular credit system (90 ECTS) and the course outline is given below. In Semester 1, students study analytical techniques (microscopy, electron microscopy and X-ray analysis; X-ray diffraction; IR-, UV- and Raman-spectroscopy, particle size analysis, NMR spectroscopy, specimen preparation), structure of materials (structure – mechanical property relationships for metals, polymers and ceramics, phase transformations with associated strengthening effects, failure processes), advanced materials processing (manufacturing with metals, ceramics, polymers and composites and typical coating methods).

Semester 1 also includes the study of typical management systems which are needed to standardize and audit manufacturing processes and systems in Industry. Semester 2 involves further study of analytical techniques and modelling software used for materials development /analysis and affords students exposure to Research challenges in Materials Science.

Students choose one elective covering the detailed materials science / engineering associated with composite materials or aerospace metallic materials, and one elective in Semester 2 from either materials selection and design (interaction between material properties and engineering design criteria, in designing components and products for manufacture, computer aided materials selection) or surface degradation and protection (coatings for improved oxidation, corrosion and wear resistance).

During Semester 2 students choose and begin work on a 45 credit research project supervised by world class researchers in Materials Science & Engineering. These projects involve the use of state of the art instrumentation at the University to acquire information on materials and processes suitable for high impact publications or IP protection.

Programme Content
This Master of Science course is a two Semester plus Summer full time programme based on a modular credit system (90 ECTS) and the course outline is given below. In Semester 1, students study analytical techniques (microscopy, electron microscopy and X-ray analysis; X-ray diffraction; IR-, UV- and Raman-spectroscopy, particle size analysis, NMR spectroscopy, specimen preparation), structure of materials (structure – mechanical property relationships for metals, polymers and ceramics, phase transformations with associated strengthening effects, failure processes), advanced materials processing (manufacturing with metals, ceramics, polymers and composites and typical coating methods).

Semester 1 also includes the study of typical management systems which are needed to standardize and audit manufacturing processes and systems in Industry. Semester 2 involves further study of analytical techniques and modelling software used for materials development /analysis and affords students exposure to Research challenges in Materials Science.

Expand+Graduates will typically pursue careers in manufacturing in metallurgical, ceramic, polymer and composite technologies related to a diverse range of manufacturing sectors e.g. aerospace components and engines (including repair), chemical processing a...

Hide-Graduates will typically pursue careers in manufacturing in metallurgical, ceramic, polymer and composite technologies related to a diverse range of manufacturing sectors e.g. aerospace components and engines (including repair), chemical processing and process plant, power generation plant and many other manufacturing Industries. M. Sc. graduates in Advanced Engineering Materials would also be expected to gain employment in consultancy, research and development, product and process development or quality control and assurance.